FLOATING SHELF TUTORIAL: a nightstand solution for small spaces
SHOPPING LIST:
Wood (for this tutorial we used Ambrosia Maple from here)
*wood must be at least of 1inch thick. We recommend 2 inches.
Wall anchors
Washers
Wood Glue (we got ours here)
TOOLS:
Compound Miter Saw*
*if you don't own a saw, most home improvement stores will cut wood for you
Drill
Ruler/Level
1/2" Drill Bit
GENERAL INSTRUCTIONS:
Please read through the entire plan before beginning this project. Take all necessary precautions to build safely and smartly. Wear safety glasses and work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always pre-drill holes before attaching with screws.
Work safely, enjoy, and ask for assistance if you need it. Good luck!
BUILDING THE SHELVES:
Step 1:
Cut boards to desired length
Step 2:
Using your power drill, drill a 4 1/2" deep hole with a 1/2" drill bit
STEP 3:
Using a ruler and a level, mark height you want shelf to be
and Drill anchor bolt holes in the wall, making sure distance between
each hole matches distance of holes in wood
Step 4:
Place your anchor screws in the bracket & push into the wall
and drill in place
Repeat for second bracket
Step 5:
Line the holes of the wood with wood glue & insert wood into brackets
Wait until wood glue is fully dried, decorate with your favorite items and enjoy!
